This great vintage style side wind tongue jack can usually be installed in your existing trailer coupler.

it is coated with a rust inhibitive process called E-coat.  The coating exceeds the ASTM standard 2000 hour salt spray test.  The coating can also serve as primer for custom paint finishes when properly sanded before recoating.

The jack incorporates precision molded, heat treated, copper alloyed metal gears and nuts along with high performance bearings.The internal screw is coated from top to bottom with a specially formulated lubricant that provides increased protection against wear and corrosion.  The gear housing is accessible, makin it easier to lubricate and repair.

• Outer tube OD is 1-7/8"
•  Inner tube OD is 1-5/8"
• Jack stands 14-1/2" above mounting plate.
  
• When retracted, tube extends 8" below mounting plate.
• When extended, tube extends 21-1/2" below mounting plate.
• Fastener holes in mounting plate are spaced 3" apart and allow for a small amount of adjustability.