These high quality etched aluminum nameplates are dead ringers for the originals on most 1961 to 1968 Airstreams and a few 1969 Airstreams.

They are 21" wide by 3.5" high.

These nameplates are a Vintage Trailer Supply exclusive. Like the originals, these are etched so they have a slight three dimensional quality, with the lettering raised and the blue field recessed.

Manufactured by a 40 year-old specialty nameplate company, the paint is high quality, fade-resistant and baked on. They are then clearcoated. They will not crack, peel or chip during your lifetime.   Plates will arrive with a protective plastic film that you should remove before installing.

NOTE: The reproduction plates being sold by some Airstream dealers as "original" are in fact poor quality and nothing like the originals.  They are screen printed rather than etched and the lettering is not accurate to the originals.

Price is for one nameplate.

Airstreams manufactured in the Ohio plant tended to use 6 mounting rivets evenly spaced in pre-drilled holes.  Airstreams manufactured in the California plant tended to use 8 mounting rivets and were not pre-drilled.  

These plates do not have pre-drilled mounting holes. Use your old plate as a template for drilling.  

These plates can be used to replace either type of plate.  Use Olympic rivets to install for an original look.