J Moulding

Home > Interior > Moulding & Trim >

J Moulding

PLEASE NOTE:
Due to its length, this item must ship in a PVC pipe and we must charge for the pipe. When ordering, you must add one length of pipe (VTS-777) to your order.

At this time we are shipping this item by UPS only. Unfortunately, at this time we are not able to ship this item outside the United States.

Our Price: $12.48

Product Code: VTS-708

Qty:

Email me when Back-In-Stock

Description

This J-shaped moulding is designed to fit around 1/16" thick material, making it perfect for edging on wheel wells on many Airstreams. When installed, a 3/16" trim will show on the outside.

Because this material is tempered, it is very stiff and does not bend easily. To make the bend around the wheel well, it will need to be heated with a propane or acetylene torch. Your goal is to soften it but not to completely remove the temper. If you remove the temper, you will have a limp noodle. Practice with a scrap piece and you will learn to achieve excellent results.

Satin anodized aluminum.
96" Long
Punched on back at least once every inch for fasteners.

Average Customer Review: Based on 2 Reviews. Write a review.

Shipping Tube for 6' or 8' Extrusions

Cost: $15.00
Add

1 of 1 people found the following review helpful:

Bending for Wheelwells	May 22, 2009
Reviewer: RJ Dial from Pleasanton, CA United States

What we do is using tin snips, cut the long flange perpendicularly to the extrusion every few inches, adjusting the spacing of your cuts to create the correct radius. Be careful not to try and force the bend, or you will kink the bead portion. Rivet through the skin into the flange sections. Olympic rivets work well for this. VintageAirsteam.com

Was this review helpful to you?

4 of 5 people found the following review helpful:

J moulding	December 8, 2007
Reviewer: Pat A from South Haven, MN United States

I made the mistake of assuming this was at least a bit flexible. It didn't work at all on the curved wheel wells I was dealing with.

Was this review helpful to you?

	Reflector with Aluminum Base $2.99
	1/8" White Aluminum Rivets (Pkg of 100) $5.65
	12 Volt Receptacle $6.99
	Cove Moulding - Large $16.96
	One-Tank Regulator & Fitting $21.93
	Air-O-Lite Window Gasket $1.95 / Foot