Nuvite Pound

Home > Polishing & Protecting > Polishing Aluminum > Polishes > Nuvite Polishes >

Nuvite NuShine II Polish: 1-Pound Jar

List Price: $49.95
Our Price: $44.95

Product Code: VTS-295

Qty:

Description

1-pound jars are the most cost-effective way to purchase Nuvite polish. To do an entire trailer, you'll need at least one-pound of each grade you use.

Features

GRADE S - Very Fine Grade S is a finishing grade that gives a really deep, clear image when used as a final step on a properly prepared, oxidation-free surface. Best used with a Cylco polisher to eliminate swirl marks in the finished surface. Grade S is not abrasive, so it won't remove oxidation. It will, however, remove swirl marks and create an unbeatable mirror. If you are looking for a polish for annual touch ups to remove very light oxidation, try Nuvite Grade A.
GRADE A - Fine Nuvite Grade A has a fine abrasive in it. It is used with a Cyclo dual head orbital polisher for touching up a recently polished trailer. Great for annual maintenance and light touch up before using Grade S for final mirror finish.
GRADE C - Medium Grade C is a cutting polish. We recommend using it to prep for use of Grade S. It is not as coarse as F7, so do not start with it if your trailer is heavily oxidized. Use Grade C to touch up a trailer that has been polished in recent years but has some noticeable oxidation returning.
GRADE F7 - Coarse F7 is a heavy cut polish. It has a very hard and sharp, but very fine, abrasive that continues it�s cutting action throughout the buffing process. It is best used for removing corrosion or heavy oxidation from aluminum surfaces. It is usually best to follow F7 with C and then grade S.
GRADE G6 - Coarse Special G6 is unique because it changes its structure during use. G6, unlike the other grades of Nuvite polish, has a high-tech media system that is designed to do a quick, aggressive oxidation cut, and immediately break down to a finer action, similar to Grade C. Use G6 when there is normal to serious oxidation on the surface of the aluminum, or even when very light corrosion is evident. It acts quickly but gently to get to a �healed� surface finish. In many cases, you may not need this polish. However, you may like to use it instead of F7 when the surface is unpolished, mill-finish, or has been allowed to deteriorate. Also good for blending surface scratches.
GRADE F9 - Very Coarse F9 is the coarsest Nuvite grade. It is not normally necessary for polishing Airstreams or other alclad aluminum trailers. It can be used to remove serious corrosion and surface blemishes. It can also be used to repair abrasive pad scratching left by previous owners. Nuvite also recommends F9 for prepping non-alclad aluminum surfaces for polishing.

DeWalt Polisher DW849

Our Price: $199.81
Add

Cyclo Polisher

Our Price: $270.00
Add

Share your knowledge of this product with other customers... Be the first to write a review.