Unlike earlier generation 9100 Series converters, 9200 Series converters have the Charge Wizard charging module built in so you don't need to buy any add-on accessories for efficient battery charging.

The Charge Wizard is a microprocessor-controlled device integrated inside the converter housing. It constantly monitors your RV battery, and then automatically adjusts the converter output voltage based on its charge status. This voltage variation is essential for fast recharging and property battery maintenance. For more information, click on the Field Notes tab above.

• INTELLIGENT BATTERY CHARGING ... The primary advantage of the INTELI-POWER 9200 Power Converter is the integration of smart battery charging technology. The built-in Charge Wizard microprocessor constantly monitors the battery voltage then automatically adjusts the converter output voltage to provide the correct charging voltage for fast recharges and proper long-term maintenance.
  
  
• CLEAN, FILTERED POWER ... This solid-state converter delivers filtered DC power to all 12VDC lighting and appliance circuits, providing safer and more reliable service than older converters.
  
  
• MULTIPLE BATTERY CHARGING ... The INTELI-POWER 9200 has the capability of charging mulitple batteries at the same time! They can even charge a combination of different capacity batteries.
  
  
• GFCI PROTECTION ... The INTELI-POWER 9200 has the LOWEST ground fauult leakage. With this unit, the user can confidently utilze the RV's AC outlets without beign concerned about a ground fault interruption of the facility's power source.
  
  
• REVERSE BATTERY PROTECTION ... If a battery is accidentally hooked up improperly (backwards), the converter will not be damaged. Extermally mounted ATC type fuses will blow when a battery is connected in reverse. Just replace them with the same type and rating.
  
  
• SHORT CIRCUIT PROTECTION ... The "smart" INTELI-POWER 9200 converter, senses--within millionths of a second--if the ouput terminals have been shorted. If this condition should occur, the converter first limits the current. Should the condition continue to exist, the converter then reduces the current output, again within millionths of a second. The INTELI-POWER 9200 was designed to protect itself. Once the short circuit has been corrected, the INTELI-POWER 9200 will automatically return to normal operating conditions.
  
  
• AUTOMATIC THERMAL PROTECTION ... If an over temperature condition should occur due to air flow obstruction or improper installation, the INTELI-POWER 9200 senses the condition and decreases power output until the unit returns to normal operating temperature. The converter will return to full output capacity as it cools down.
  
  
• IGNITION PROTECTION ... All INTELI-POWER 9200 series converters are ignition protected.
  
  
• INTERNAL COMPONENT COOLING ... The INTELI-POWER 9200 series of converters are equipped with a variable speed cooling fan. The fan will only run at the speed needed to prevent the converter from overheating and shutting down. Running the fan at lower speeds where possible reduces the audible noise generated by the fan while protecting the the converter from excess heat. The location of the fan allows for the maximum cololing of both the case and components.
  
  
• LOW LINE VOLTAGE PROTECTION ... If the AC input voltage is insufficient, the converter shuts down to protect your appliances from damaging low voltage irregularities. The unit will return to normal operation when the voltage returns to normal.
  
  
• HIGH LINE VOLTAGE PROTECTION ... If the AC input voltage exceeds 135V, the converter will shut down to prevent damage. The unit will return to normal operation when the voltage returns to normal.
  
  
• The INTELI-POWER series of power converters have undergone tens of thousands of hours of strenuous engineering testing to insure years of trouble free operation. These converters have been designed and tested to provide mainenance-free operation.