Trailer Floor Repair Screws

Home > More Exterior > Rivets & Fasteners > Screws & Bolts >

Floor Repair Screws

Our Price: $7.99 / Pkg of 25

Product Code: VTS-387

Qty:

Description

These #12-24 self-tapping machine screws are specially designed to secure plywood decking to steel frames when you are working in a blind hole. That makes them ideal in travel trailers when you are replacing a section of the plywood floor.

Elevator bolts are even better, but they require a nut underneath to secure them. Unless you're dropping the belly pan, you won't be able to use nuts and bolts.

These screws tap the steel below the floor, using the chassis member, itself, as the nut.

The manufacturer recommends using in frame members as thin as .125". Our experience is that they hold securely in frames down to .100" thick.

The manufactuer also states that they will self-drill and self-tap up to .250" material, but our experience is that to avoid aggrevation, you should pre-drill all holes with a #16 bit and pre-tap all frames .125" thick or thicker.

Screws are 1-5/8" long. The flat Phillips heads countersink themselves.

Sold in bags of 25 screws.

Features

Point has precise cutting edges to improve drill performance with less effort.
Special winged fasteners ream a hole in wood preventing thread engagement during drilling.
Flat head design countersinks and seats flush in wood.
Electroplated epoxy coating provides excellent corrosion resistance and lower tapping torque.

Elevator Bolts

Starting at: $13.99 / Pkg of 50
Add

12-24 Tap/#16 Drill Combo Pack

Our Price: $5.49
Add

Share your knowledge of this product with other customers... Be the first to write a review.