Vintage Trailer Dome Hubcap

Description

This polished stainless steel hub cap is a dome shape that gives a vintage baby moon look.

It fits in place by snapping around the outside of 3 or 4 nubs on the wheel. It does not fit on wheels with spring clips riveted to the face of the wheel.

It fits our 6-bolt 15" rims with some effort. It may be a very tight fit in some cases. If it doesn't fit well for you, do not hammer the cap.

The cap does not fit any of our 5-bolt rims. Please take the time to verify the dimensions work on your rims. Price is for one hubcap.

IMPORTANT NOTE: One of the problems with the original and with this replacement is rust. We recommend spraying the chrome (and any other chrome on your trailer) with a clear lacquer (from the hardware store) before installing it. That will protect it from the salt and prolong its life.

Hubcap Dimensions:

Inner Flange Diameter = 10-3/16"
Overall Outer Diameter = 10-1/2"
For these hubcaps to fit, your wheels must have a nub diameter of approximately 10-3/8" to 10-1/2"
Overall Inside Height at Center = 3.25"

How To Measure

Description Above Price

Will fit our 6-bolt wheels with some effort. See notes below.

10-1/2" Dome Hubcap

10-1/2" Dome Hubcap

Information

Customer Service

Products

Policies