Sale 20% Off Our Flamingo Gifts! ==> Click Here to See Them

  Home > Exterior > Windows > Window Hardware >

Window Operator - Gear 7-11/16"
Window Operator - Gear 7-11/16"

Our Price: $16.99

Product Code: VTS-323

Recommended Accessory:
Nylon Friction Pad [Add $3.45]

Our custom crank operators are the best replacements available for the originals used on many Hehr windows from the mid-1950s through the 1960s. The arm is 7-11/16" from the pivot point to the hole at the end of the arm. Mounting holes are 3" apart.

They work very well on Hehr Standard windows and are an acceptable substitute for Hehr Hall-Mark 12 windows.

Our gears are stamped steel rather than pot metal, so they won't strip out like the old ones.

ur operators have a 1/4" diameter hole in the tip of the arm to accommodate the Hehr nylon friction pads (sold separately) which were used on many windows in the 1950s and 1960s. This minor detail will make your restoration much easier.

nd to top it all off, we include a quality two-piece spinning handle rather than a cheaper one-piece fixed handle.

his is very similar to original Hehr part number 008-131.

TIP: If your window requires this style operator but with a shorter arm, you can cut the arm to length and re-drill the hole.

Might We Suggest
Hehr Locking Handle & Catch Nylon Friction Pad
Our Price: $12.80
Our Price: $3.45
Hehr Window Lock Nylon Friction Pad

(Your shopping cart is empty)