This is one of several replacement drain waste valves available in the old Thetford standard. The Thetford standard is no longer used with new RVs but was used quite often in the 1960s and right up to the 1990s by many manufactures. Thetford valves are very high quality and can be expected to last for decades. Because they have proprietary configurations and slightly different dimensions than contemporary dump valve fittings, caps, and hoses, vintage trailer owners often need to source the old Thetford standard parts. Most RV shops do not stock these parts because they are rarely needed by their newer RV customers.
In the early years Thetford made the slide blades from stainless steel. However, all blades are plastic now. In all drain waste valve applications, the plastic blade valves are a perfectly good fit for old metal blade valves. The only exception is that when a valve is used as part of the assembly of a toilet, the plastic cannot be substituted for the old metal blade version.
Despite being white in color, Thetford valves are made of ABS plastic. If solvent welding to pipe or other fittings, it is best to use with black ABS pipe rather than white PVC pipe.
3-1/2 ID hub fitting for mounting to a 3" ID pipe. Hub is 2" deep.
3" spigot (3-1/2" OD). 1-3/8" long. A spigot is the same ID and OD as a standard 3" drain pipe. The spigot can be solvent welded into a hub with a -1/2" ID.
Included. No extension possible.
Version 08669 of Thetford Slide-EZ valve 01447. Every Thetford valve ever made says 01447 on it, so you can't rely on the number molded into the plastic to guide you in selecting the correct version. Instead, look carefully at the top and bottom of the valve.
A modern cost-effective substitute for this valve can be assembled from three of our Valterra standard parts: