We're happy to offer our own stainless steel reproduction of the original zinc plated steel license plate bracket found with Bargman Trail-Lite license lights in the 1950s (see the second photo for context).

This license holder slides up under the old Trail-Light cast light base and the three mounting holes on the bracket are concealed under the base of the light base. The three holes are not intended to line up with the two mounting holes on your old Trail-Lite license light. The light is mounted separately to the trailer.

Bracket is 10-1/4" wide and is stepped to provide a 5/8" stand-off for the license from the trailer body to allow for nuts behind it. 

This is the license bracket only and does not include the cast light.

Dimensions:

• Width 10-1/4"
• Height  3-5/8"
• Upper light mounting section is 1-3/8" high by approximately 2-1/2" wide
• Light mounting holes are 0.2" diameter
• Mounting holes are in a triangular pattern with top holes 1.85" apart and 1" from lower hole to either of the top holes
• Offset from trailer for license plate mounting bolts is 5/8"

Made of stainless steel so you won't have rust this time.